AQ Wireline Drill Rod
Model :
Raw Material:
Length :
Product Description
Key Features
Fully Robotic Automation ，Robotized & Automated Processing
Accuracy of threads will determine the use effects and life time of drill rod and casings. CNC latches and form cutter are used in thread opening processing to minimize error made by anthropic factors.
Load efficiency of 30% provides sufficient strength for most drilling conditions
SINOCOREDRILL only choose the best steel tubes in the market to manufacture our rods and pipes. Spot check will be conducted after the steel tubes delivered to company. We will make sure the compositions and specifications match the inspection report form the suppliers.
Whole rod Heat treated significantly increases rod life
Rod Pin thread crest is hardened to nominal 50-55 HRC to eliminate damaging ‘adhesion’ wear Eliminates the transfer of wear material back and forth as seen between threads of equal hardness, leading to large scale galling and joint seizing Heat treatment will greatly improve the material strength and increase the thread wear life of the rods and casings. We conduct either tru-wall or both ends heat treatment to the tube body. After heat treatment, strength, hardness, straightness and concentrically of the treated tubes will be tested in our lab.
Specifications
Q series wireline drill rods specifications:
|
Size |
O.D |
I.D |
Weight (kg/3m) |
Remarks |
| AQ | 44.5mm | 34.9mm | 14.0 |
Entire length heat treated, case hardened at two ends |
| BQ | 55.6mm | 46.1mm | 18.0 | |
| NQ | 69.9mm | 60.3mm | 23.5 | |
| HQ | 88.9mm | 77.8mm | 34.5 | |
| PQ | 114.3mm | 101.6mm | 52.2 |
Raw materials:
SINOCOREDRILL only choose the best steel tubes in the market to manufacture our rods and pipes. Spot check will be conducted after the steel tubes delivered to company. We will make sure the compositions and specifications match the inspection report form the suppliers.
Heat treatment control:
Heat treatment will greatly improve the material strength and increase the thread wear life of the rods and casings. We conduct either tru-wall or both ends heat treatment to the tube body. After heat treatment, strength, hardness, straightness and concentricity of the treated tubes will be tested in our lab.
Thread opening process:
Accuracy of threads will determine the use effects and life time of drill rod and casings.
CNC latches and form cutter are used in thread opening processing to minimize error made by anthropic factors.
Additional thread treatment:
Surface of the threads will be cleaned to remove burr adhered after threads are opened.
Size available as followings:
Wireline series: AQ, BQ, NQ/NRQ, HQ,/HRQ PQ/PHD
Casing: AW, BW, NW, HW, HWT, PW,SW
Chinese Standard: S56, S59, S75, S95, S110, S130, S57X, S75A, S95A
Wireline Drill Rod vs. Conventional Drill Rod
| Features | Wireline Drill Rod Vs. | Conventional Drill Rod |
|---|---|---|
| Core Retrieval | Through wireline-no need to pull rods | Must extract full drill string |
| Time Efficiency | Very fast, ideal for deep coring | Slow, labor-intensive |
| Cost per Meter | Lower in deep-hole drilling | High due to tripping time |
| Core Quality | Minimal disturbance; higher recovery | More disturbance risk |
| Best Application | Exploration, mining, geothermal | Shallow or rotary projects |
| Safety | Fewest heavy rod-handling cycles | More manual handling required |
The AQ drill rod is one of the smallest and lightest in the “Q” series, typically used for shallow-to-medium depth drilling where smaller core samples are sufficient. Its compact size makes it ideal for highly maneuverable rigs and applications requiring minimal disturbance to the ground.
AQ rods are often employed in initial exploration, geotechnical investigations, and environmental sampling where quick penetration and detailed stratigraphic data from smaller cores are prioritized.
Application
- Mineral exploration (gold, copper, nickel, lithium)
- Geotechnical surveys
- Geothermal well development
- Hydrological research
- Environmental monitoring
